what is RCC_CUST error in SAP TM system?
↧
what is RCC_CUST error in SAP TM system
↧
SRM SUS invoice Fleet conditions .
Hi Masters.
scenarie SRM 7.1-SUS and ECC 6.0 . Clasic.
we create a PO with Fleet conditions and then made reception on MIGO normally and create two movements send GR moviment on REPDDELVY but on SUS Invoice not show cost related from Fleet only show movement of material reception.
some guide to resolve that issue.
thanks in advanced.
↧
↧
Application error of BO /SCMTMS/TRQ - OTR not creating
Hello,
I am creating sales order in ECC system however system is giving short dump with the error "Internal application error of BO /SCMTMS/TRQ of component TM-FWM-FWO", so SO is not coming through to the TMS system.
Even when i use existing FO and try creating delivery order and shipment document it doesn't happen and see short dump.
When i Checked ST22 it gives this error.
"MESSAGE_TYPE_X"
"/BOBF/CL_FRW==================CP" bzw. /BOBF/CL_FRW==================CM00Z
"SET_APPLICATION_ERROR"
Message class....... /BOBF/FRW
Number.............. 013
Variable 1.......... /SCMTMS/TRQ
Variable 2.......... TM-FWM-FWO
Category ABAP Programming Error
Runtime Errors MESSAGE_TYPE_X
ABAP Program /BOBF/CL_FRW==================CP
Application Component AP-RC-BOF-RNT
If you cannot solve the problem yourself, please send the following information to SAP.
Can anyone assist here please.
Regards
Anand
↧
Shipment block possible?
Hello,
Is there any way to set up a manual shipment block, so that other users cannot do eg. PGI and shipment comoletion for that whole shipment ?
It is not enough to make a sigle delivery block, my users want to block the whole shipment, wgile awaiting for licences etc...
Thanks a lot.
Olaf
↧
MD62 Screen PIRs in RED
Hi Gurus,
Why in MD62 the PIRS would show up in red color is there any significance to that? Secondly When and why Split Perd. background button would show up. Pls, help. Thank you
↧
↧
Pop up message on IE 11 browser
Hi Experts,
As of now we are using browser ie8 but now we want to migrate to ie11. After migrating we are facing problem with create shopping cart.
When we add a line item to cart it displaying a pop up message as leave the page or stay on page. When we click on leave the page it is not performing any action.
This issue is very high priority kindly suggest on this.
Thanks and Regards,
Devi.
↧
Web I Audit report # ERROR
Hi Gurus,
i am trying to customise an existing audit report in 3.1 environment.
j have created 2 variables
Start date: =FormatDate(ToDate(UserResponse("Start Date:");"");"MM/dd/yyyy")
End date: =FormatDate(ToDate(UserResponse("End Date:");"");"MM/dd/yyyy")
output: "Date range: " + [Start date:] + " to "+ [End date:]
i am getting errror: #ERROR
Thank you for the help !!!
↧
Active table is empty
Hi ,
We are loading data via BODS to DSO and we have written a routine for the same.
Issue is when we are inserting records , it is inserting the same in new data and active table data.
Now there are couple of duplicate records we have in active table.
so when we are inserting the new record again with same key as which exists in active table, we are marking the records with recordmode 'D' for older records and inserting new records with recordmode blank with help of ABAP code.
Everything is working fine till new data table, we can see new record and deleted record, but once we activate request, new record disappears and active table becomes empty. Active table should have new records only and old ones should be deleted and moved to change log .
Has anyone faced such issue?
Br
Sumeet
↧
Shipment cost pricing
Hello everyone,
I am new to LE. I have got an requirement from my client to configure export charges for a chemical plant.
The charges are like as follows:
Port 1 Port2
| Particulars | UOM | Non HAZ | Haz | Non HAZ | Haz |
| (Rs./ UOM) | (Rs./ UOM) | (Rs./ UOM) | (Rs./ UOM) | ||
| Agency Charges | Per 20 Ft FCL | 200 | 300 | 200 | 300 |
| Port in Charges | Per 20 Ft FCL | 100 | 100 | 100 | 100 |
| EDI Documentation Charges | Per Shipping Bill | 75 | 75 | 75 | 75 |
| Haz documentation charges | per shipment | 500 | 500 | ||
Like I have heard about multidimensional pricing but don't have any idea about it. So if you could help me to understand the multidimensional pricing and how to configure this. As per 20ft Full Cotainer Load(FCL) how will I get as UoM as my sales UoM is Tonne.
Thanks in advance
↧
↧
Work Manager 6.2 on Windows Mobile 6.5 never completes synchronization
Hi all.
Im unable to finish initial synchronization of Work Manager data on Windows Mobile device.
My landscape is as follows:
- Windows Mobile 6.5 device
- More than 512 MB of free space
- Work Manager 6.2 (downloaded from the Download center)
- SMP 3.0 SP08
The data in the devices and functional location tables is approx 100.000 records. The timeout on the server is set to 50 minutes. The internet connection is very good (both stable and fast). Certificate is successfully imported and used on the mobile device. Localisation is disabled (English language is used). Im installing Work Manager as Encrypted client data on the main partition of the device (although installing it on other partitions does not make any difference). Im not using camera nor scanner on device.
After I get connected and logged onto the server, the agentry starts to download the data (using Angel connection). The data keeps comming until a moment when, randomly, agentry displays either error 14 or error 11. The network did not fail at any point (I have monitored that), nor did the process last for more than 15 minutes before failing.
Reinstalling the app, cleaning the device, cleaning \data folder, clearing registry nor restarting it helps. At some point, the agentry continues to download the data and crashes in the middle of the process, without displaying any error. I also went through the SAP notes, and couldnt find anything that would resolve the issue.
Has anyone run into this kind of issue? Do you have any suggestions on how to proceed or debug it? Since there is nothing under "Windows Mobile 6.5" download link in SAP download center, I downloaded the only thing I could: application for Windows Mobile 6.0. Also, Windows Mobile 6.5 is on the official supported devices list (for some devices).
Thanks in advance!
Marko
↧
IDoc for HR Master Data
Dear experts.
I have the following requirement.
I need to have an IDOC that allow download information when the master data is deleted, ie when I delete information of infotype 0105
HR Master Data Distribution using ALE-IDOCS
What are the customizing that I need do in the system for get this ? How or where are configured when is data are deleted?
What message type I should active in BD50 tcode ?
Regards
↧
FPM Process in ESS
Dear Experts
How can I add sap Standard FPM Processes and My Processes to ESS (webdynpro abap) , so i can access them from the landing page.
Regards
Ghadeer
↧
SAP HCM To Successfactors - Unable To See Service Interfaces In SF Related BS
Hi All,
We have implemented HCM Add on 3.0.
Now my work is to send Employee data to successfactors system from HCM.
MY Issue is when I try to create a Receiver Determination, i am unable to see SF related Service Interfaces even in BS also.
I have done SLD Cache refresh also in ID.
I have deleted and re imported BS also. No Use.
But when I try to add those Service Interfaces to a BC I am successful.
Any one please let me know why it is behaving like this?
↧
↧
RFC Receiver channel: connect to SAP Gateway failed
Dear experts,
I have to connect from SAP PI 7.3 (dual stack) to a Windows machine on which an RFC application is installed.
It goes: "SAP ERP --> PI --> RFC on Windows machine"
On the PI system in ABAP in SM59 I configured a RFC destination, type T - "TCP/IP Connection".
I do it with "Registered Server Program" and give the name of that program called "SAPIDOTT".
Gateway Host = PI System
Gateway Service = sapgw**
When I do "Utilities" --> "Test" --> "Connection Test" it is successful;
The unicode test says: "Target is not a unicode system (character size 1)"
So this works.
Now on SAP PI I am configuring the RFC receiver channel:
I am again using the Program ID I used before in SM59.
But I get the following error in Runtime Workbench:
It seems to me that the value I give in the Receiver channel "Application Server Service (Gateway)" is incorrect.
Is there a default value I can use? Or should the administrator of the RFC application on the target machine know this value?
Summary: the connection from ABAP works - from Java it does not work.
Thank you for any hint you can give me,
Peter
↧
Barcode on smartforms
Hi,
I'm working on bar-codes to be generated through smart-forms.
I got many useful links on sap help for this. I took an example online from the below link and developed barcode using my own logic on pick slip.
Step-by-step New Barcode Technology for Smart Forms - Code Gallery - SCN Wiki
When I executed my bar-code from se73 after giving the "bar-code data", i'm able to get a bar-code and the corresponding data/number below it.
But, when I execute the same through smart-forms, i'm not getting the data/number below the bar-code. I have given the code logic for this
"concatenate "delivery #" and "material number".
Please help me with this.
Thank you.
↧
PLKOD-DATUB
Hi,
I need to have the "Valid to" Date in my Z-Programm like it is shown in CA03 but in se16n in plko I cannot find the datub field.
How to import the exact valid to date from CA03 (Administrative data) ? how is it possible to use it from the structure plkod? is it the same like plpod-datub?
↧
Report using wrong database name in fully qualified table names
Background
Consider three SQL databases: Test, Production, and ProductionCopy. All three databases have identical schemas. All are running on the same server.
I have a report with several subreports. This report makes use of both Crystal Reports database commands and directly reading the database tables.
When developing the report inside the Crystal Reports IDE, I have set all datasource locations to point to Test. At runtime in my .NET application, all report datasources in the CrystalDecisions.CrystalReports.Engine.ReportDocument object are recursively set to Production.
Problem
When I run this report against Production, all data from tables is being read from Test. All data from Crystal Reports database commands is being read correctly from Production.
When I run the report against ProductionCopy, the problem goes away.
The only change being made to switch between the two is to the connection string in the application's Web.Config file.
When I run the application from Visual Studio, the problem goes away. To recreate, I have published the application to run locally on IIS.
Running traces in SQL Server Profiler, all report queries are being executed against the proper database. However, when running against Production, the queries reading directly from tables are using Test in the fully qualified table name.
i.e. SELECT "SomeTable"."Foo", "SomeTable"."Bar", "SomeTable"."Baz" FROM "Test"."SomeSchema"."SomeTable"
However, when running the report against ProductionCopy, the fully qualified table names are correct.
i.e. SELECT "SomeTable"."Foo", "SomeTable"."Bar", "SomeTable"."Baz" FROM "ProductionCopy"."SomeSchema"."SomeTable"
What I Have Tried
Restoring ProductionCopy directly from the live version of Production, to ensure that both contain identical data.
Attaching a debugger to the IIS process to check the values of the data connections in the ReportDocument object at runtime. At the point ExportToStream is called on the report, all database and datasource connections for the report and all subreports point to Production.
Attempting to serialize the ReportDocument object so that it can be searched for all instances of the string "test", though I was unsuccessful in my attempts.
Updating to the latest versions of Crystal Reports 2013 (14.1.6.1702) and Crystal Reports for Visual Studio (13.0.15.1840).
Running another report with a similar structure, but the problem does not occur.
Next Steps
It turns out I can't attach a .rpt file to this post, and I definitely can't attach a MCVE.
↧
↧
Condition to find the distinct values in a column.
Hello All,
I have scenario like there is a sales order which has two line items in it.
For eg.
Sales_order sales_guid flag1 flag2
36000101 1234 0 Complete
36000101 5678 1 In-Progress
I have flag for the cases like,
if (flag1 > 0),'In-Progress','Complete' -> calculated column flag2
from the above calculated column I can filter out
flag2 and flag2
Complete In-Progress
Complete In-Progress
But now I need the flag for the below combination.
when there is a combination in flag2 then flag3 else flag3
Complete x y
In-Progress x y
Kindly suggest me solutions how we can achieve it. I am using graphical calculation view.
Regards,
Vicky.
↧
Production Order At Save (SAPLCOBC)resb_bt[]
Hello experts,
I've implemented badi WORKORDER_UPDATE and i read memory (SAPLCOBC)resb_bt[] to get components of the order. My problem is that even if i delete some lines and add some others table will be updated with new lines but not delete the deleted ones neither will it change deletion indicator.
Is there anyway to find which lines are deleted or read from memory only the ones currently available
Regards
↧
Stored Procedure for delivery quantity more than A/R reserve invoice quantity
Hi Experts ,
I tried to right store procedure to restrict the Delivery should not exceed to reserve invoice but its not taking . this is my store procedure
IF @transaction_type IN (N'A', N'U') AND
(@Object_type = N'15')
begin
if exists (SELECT T0.BaseEntry, SUM(T0.Quantity)
FROM dbo.DLN1 T0 INNER
JOIN dbo.INV1 T1 ON T1.DOCENTRY =
T0.BASEENTRY
WHERE T0.BaseType = 17 AND T0.ItemCode =
T1.ItemCode AND T0.BaseLine = T1.LineNum
and T0.DOCENTRY = @list_of_cols_val_tab_del
GROUP BY T0.BaseEntry
HAVING (SUM(T0.Quantity) > SUM(T1.Quantity)) or sum(t0.quantity) >
sum(t0.BaseOpnQty))
begin
select @Error = 10, @error_message = 'Delivery quantity is greater than Reserve qty.'
end
end
Please help me to create this store Procedure .
Thanks
↧